[FR2] PIVOT 3-DRIVE THROTTLE CONTROLLER (P3D)

jkvalen · Club Advisor Joined: 07 Dec 2006 Posts: 1590 Location: KL

vento wrote:

however, i was told sprint booster response is faster (e-throttle amplify much stronger, ie. intake open bigger and quicker) than P3D sport 7 mode.

correct me if i m wrong

seems like this poison also got me liao.. Twisted Evil

someone mention to me...it true...btw i current using P3D Laughing

Tissue · Amateur Lvl 2 Joined: 06 Mar 2007 Posts: 194

woah. all this poison. Ive waited 5 months for this device. Installing this friday

ed · Club Advisor Joined: 15 Jun 2006 Posts: 3281

aiyo, wanna go faster ... no need booster la. just dump in a APEX NEO and u will get 3-5WHP all around .... and its sub-1k around the same price.

_________________

rev_zone · Posted: Tue Sep 16, 2008 2:13 am Post subject:

ed wrote:

aiyo, wanna go faster ... no need booster la. just dump in a APEX NEO and u will get 3-5WHP all around .... and its sub-1k around the same price.

I used to have NEO but if you let me choose again I will still go for SB as it's definitely better than NEO. Wink

ed · Club Advisor Joined: 15 Jun 2006 Posts: 3281

hi paul

long time no hear ....

the great thing about the booster is only acceleration at standing start upto 80kph, doesnt really give more "power" after u hit above 100kph .... i look at the NEO purely fr improving the AFR ratio to give a combo of power & better fuel consumption.... becos after 100kph, can still accelerate faster.

why i m on the P3D is becos i hate splicing my wires and the P3D provides a harness along & the god sent option of having a economy mode ....

again, just my preference, nothing against the SB & P3D.

_________________

Tissue · Amateur Lvl 2 Joined: 06 Mar 2007 Posts: 194

can those bros who install advise how long approx to install P3D?

thanks

Alvin_Kerk · Posted: Tue Sep 16, 2008 10:12 pm Post subject:

Tissue wrote:

can those bros who install advise how long approx to install P3D?

thanks

Less than 10 minutes as it's plug and play, Wink

Tissue · Amateur Lvl 2 Joined: 06 Mar 2007 Posts: 194

serious? This is pivot 3 drive? I thought need to thread cable from engine bay through firewall then to the area you want the display to sit? Has to take more than 10min

ronnie2k7 · Committee Joined: 22 Oct 2007 Posts: 632

Tissue wrote:

serious? This is pivot 3 drive? I thought need to thread cable from engine bay through firewall then to the area you want the display to sit? Has to take more than 10min

Yeah lor... becos the installer already very pro mar... Cool

_________________

Tissue · Amateur Lvl 2 Joined: 06 Mar 2007 Posts: 194

woah. my installer quoted me 1 hr of labor. I guess its fair enough because me not pro. Probably will take me 10min to take it out of the box.

- JaY - · Veteran Joined: 08 May 2008 Posts: 346 Location: K.L

the setup is only at ur pedal.. i dont rmb them opening my hood. juz the accelerator pedal. Razz

Tissue · Amateur Lvl 2 Joined: 06 Mar 2007 Posts: 194

Installed mine today. Yes it did take 10 min.
Did you guys install it to the REVERSE wire? If so, how did you do it? Where on the car did you tap to reverse gear?

My experience: No difference. SP1 to SP7 is the same. Felt a tiny bit better than stock. Is it because i did not do the initial set up? Or is something not installed properly?

jkvalen · Club Advisor Joined: 07 Dec 2006 Posts: 1590 Location: KL

Tissue wrote:

Installed mine today. Yes it did take 10 min.
Did you guys install it to the REVERSE wire? If so, how did you do it? Where on the car did you tap to reverse gear?

My experience: No difference. SP1 to SP7 is the same. Felt a tiny bit better than stock. Is it because i did not do the initial set up? Or is something not installed properly?

after install...did you do the initial setup ?? refer to the manual instruction....for the initial setup...

Tissue · Amateur Lvl 2 Joined: 06 Mar 2007 Posts: 194

i got a sifu to install. Ive msged him but waiting for reponse. I dont think it would have been done as its the same as stock.

Did you wire to reverse wire?

EDIT: Just went down and did the settings. Will take a drive tonight.

My SIFU did not know how to tap to reverse. Can anyone share how to?

thanks heaps

jkvalen · Club Advisor Joined: 07 Dec 2006 Posts: 1590 Location: KL

Tissue wrote:

i got a sifu to install. Ive msged him but waiting for reponse. I dont think it would have been done as its the same as stock.

Did you wire to reverse wire?

EDIT: Just went down and did the settings. Will take a drive tonight.

My SIFU did not know how to tap to reverse. Can anyone share how to?

thanks heaps

please refer to pivot manual

Only registered users can see links on this forum!
Register or Login on forum!