Engine Diagnostic Mode

DJmobile · Newbie Joined: 27 Sep 2009 Posts: 17

Hi to all 8gcc members, found something that i would like to share
I have not tried it myself as still waiting for collection.. anyone tried this before..

Source is from other forum.. not sure if this works? Confused

Engine diagnostic Mode
1. Push and hold the SEL/RESET switch button.
2. Turn the headlights ON.
3. Turn the ignition switch ON (II).
4. Within 5 sec., turn the headlights OFF, then ON and OFF again.
5. Within 5 sec., release the SEL/RESET switch button, and then push and release the button three times repeatedly.

While in the self-diagnostic mode, the dash lights brightness controller operates normally. While in the self-diagnostic mode, the SEL/RESET button is used to start the Beeper Drive Circuit Test and the Gauge Drive Circuit Check.

If the vehicle speed exceeds 2 km/h (1.2 mph) or the ignition switch is turned OFF, the self-diagnostic mode ends.

Click below for video

Only registered users can see links on this forum!
Register or Login on forum!