Blitz Rvit iColor - Gauges for FD1&Fd2 - PLug and Play .

netken

R-VIT i-Color
R-VIT i-Color is a monitoring multi meter designed for 2003 or later Toyota CAN-bus or vehicles equipped with 1996 or later ISO14230 diagnostics connector. Installation is simple, it is install just by connecting to the vehicle diagnostics coupler. It features a 65,000 Color LCD screen and multi angle display. It can be set on three different angles depending on the location of the installation. R-VIT i-Color monitors a maximum of 29 items and able to display 6 monitored items simultaneously. Monitored items are: Speed, RPM, Water Temp, Ignition Timing, Fuel Injection Time, Air Flow Voltage, Outside Temp, Intake Manifold Pressure, Boost, O2 Voltage, O2 Rear Voltage, AF 1, AF 2, Intake Air Mass , Battery Voltage, Throttle Output, AT Temp, Gear Position, 4WD Ratio, Fuel Pressure, Momentarily Fuel Consumption, Malfunction Diagnosis Code, Lock Up ON ・ OFF, External Voltage Input (Press, A/F Box) / External Temp Input, Fuel Pressure Control, Fuel Injection Control / Electric Fan Control, etc. Depending on the vehicle, the monitored items vary or cannot be monitored.

Only registered users can see links on this forum!
Register or Login on forum!

seems that this device is 100% plug and play with the need to just connect to the OBDII sensor port beneath the steering, and prolly another power source from the cigarette lighter ... so installation is a breeze ..

singapore already sold out for time being - i think estimated RM1500 or more ... what do u think ? better than scangauge i suppose with the colour screen and turbo like data display?

_________________

netken · Posted: Wed Feb 25, 2009 9:35 am Post subject:

broken english translation :

As for BLITZ R-VIT series, after 1996
The fault diagnosis connector which conforms to ISO14230,
Or CAN-bus communication system after 2003
You connect to the adoption vehicle with coupler on,
Monitoring and control of various vehicle informations (only part model)
It makes possible, it is the multiple monitoring system.

The evolution of R-VIT does not know that it is restricted.
It corresponds to the up-to-date NISSAN HONDA CAN-bus communication system!

R-VIT i-Color FLASH Ver. 2.1 So, it conforms to the up-to-date CAN-bus communication system of the NISSAN HONDA.
The NISSAN skyline (V36/PV36/CKV36) GTR,
HONDA CIVIC TYPR-R (FD2), HONDA STREAM (RN6/7/8/9),HONDA FIT(GE8) promptly correspondence.

In addition, the rec suspension/Toyota/the CAN-bus communication system on-board car of Matsuda/[mitsubishi]/Daihatsu is included
It corresponds to approximately 400 car types.
Loading 32bitOS. Adopting 65,000 color full-color liquid crystal.
Loading the flash ROM of new development. Because rewriting the program is possible,
Correspondence such as addition of future version upgrade conformity model is possible.
(Version upgrade becomes compensatory treatment. Please inquire details)

If “R-VIT i-Color FLASH” it is errand, the internal software “Ver. 2.1” Update possibility.
As for details this viewing (as for update it is compensation).
As for indicatory possible item in 30 types up to maximum of 6 simultaneous indicatory possibility.
Indicatory possible item changes (with model. Please view the up-to-date conformity chart)

Apparently previous devices were unable to read the civic FDs due to this CAN-bus protocol ...

_________________

jan999 · Amateur Lvl 2 Joined: 18 Nov 2008 Posts: 179

RVit i-color can be used in CANBus comm car. so far in the amrket only below can be used:

i) Blitz RVIT I-Color
ii) Blitz RVIT DS DAta Link Station
iii) GReddy Infortouch (not informeter, informeter guarantee cannot)
iv) HKS CAMP 2

btw, i got Blitz RVIT DS DAta Link Station want to sell, i used it for 2 months only, anyone keen?

kjskho1 · Posted: Wed Feb 25, 2009 10:08 pm Post subject:

jan999 wrote:

RVit i-color can be used in CANBus comm car. so far in the amrket only below can be used:

i) Blitz RVIT I-Color
ii) Blitz RVIT DS DAta Link Station
iii) GReddy Infortouch (not informeter, informeter guarantee cannot)
iv) HKS CAMP 2

btw, i got Blitz RVIT DS DAta Link Station want to sell, i used it for 2 months only, anyone keen?

pls dun hijack ppl's thread. get approval n post up ur own lelong.

_________________
_______
jackson

mcwk · Committee Joined: 17 Apr 2007 Posts: 2115 Location: Melaka

I got some information that these OBDII monitors won't work with our FD - example, the HKS CAMP II.

Also, is there any OBDII port splitter available? Mine already used for the P3D....

_________________

jan999 · Amateur Lvl 2 Joined: 18 Nov 2008 Posts: 179

oops, sorry...

CAMP II no issue to extract data from OBD II.

yes, there is a multi socket for OBD II available in market. couple of ten dollars only

mcwk · Committee Joined: 17 Apr 2007 Posts: 2115 Location: Melaka

netken wrote:

broken english translation :

As for BLITZ R-VIT series, after 1996
The fault diagnosis connector which conforms to ISO14230,
Or CAN-bus communication system after 2003
You connect to the adoption vehicle with coupler on,
Monitoring and control of various vehicle informations (only part model)
It makes possible, it is the multiple monitoring system.

The evolution of R-VIT does not know that it is restricted.
It corresponds to the up-to-date NISSAN HONDA CAN-bus communication system!

R-VIT i-Color FLASH Ver. 2.1 So, it conforms to the up-to-date CAN-bus communication system of the NISSAN HONDA.
The NISSAN skyline (V36/PV36/CKV36) GTR,
HONDA CIVIC TYPR-R (FD2), HONDA STREAM (RN6/7/8/9),HONDA FIT(GE8) promptly correspondence.

In addition, the rec suspension/Toyota/the CAN-bus communication system on-board car of Matsuda/[mitsubishi]/Daihatsu is included
It corresponds to approximately 400 car types.
Loading 32bitOS. Adopting 65,000 color full-color liquid crystal.
Loading the flash ROM of new development. Because rewriting the program is possible,
Correspondence such as addition of future version upgrade conformity model is possible.
(Version upgrade becomes compensatory treatment. Please inquire details)

If “R-VIT i-Color FLASH” it is errand, the internal software “Ver. 2.1” Update possibility.
As for details this viewing (as for update it is compensation).
As for indicatory possible item in 30 types up to maximum of 6 simultaneous indicatory possibility.
Indicatory possible item changes (with model. Please view the up-to-date conformity chart)

Apparently previous devices were unable to read the civic FDs due to this CAN-bus protocol ...

So, does it work on our FD1 & FD2?

_________________

netken · Posted: Sat Feb 28, 2009 7:16 pm Post subject:

tested today - yes it does!

_________________

mcwk · Committee Joined: 17 Apr 2007 Posts: 2115 Location: Melaka

netken wrote:

tested today - yes it does!

Great! Let's hope Blitz will release an updated R-VIT DS for our FD soon.

_________________

longjohn · Posted: Sun Mar 01, 2009 1:03 pm Post subject:

netken wrote:

tested today - yes it does!

some pic bros..

netken · Posted: Mon Mar 02, 2009 9:00 pm Post subject:

longjohn wrote:

some pic bros..

as requested :

_________________

mond ah! · Veteran Joined: 01 Aug 2007 Posts: 404

bro netken... colour very matching ooh... nice~

samson01 · Amateur Lvl 2 Joined: 21 Mar 2008 Posts: 267 Location: KL

wah... very tempting la....

_________________

longjohn · Posted: Wed Mar 04, 2009 9:51 am Post subject:

netken wrote:

longjohn wrote:

some pic bros..

as requested :

Ver nice bro..How much it will cost Very Happy

mcwk · Committee Joined: 17 Apr 2007 Posts: 2115 Location: Melaka

Remember to hide it when parking car....

_________________